1 3

BDS Suspension

BDS 3.5 Inch Lift Kit | FOX Performance Elite Coil-Over | Chevy Silverado 1500 (19-25)

BDS 3.5 Inch Lift Kit | FOX Performance Elite Coil-Over | Chevy Silverado 1500 (19-25)

SKU: BDS755FDSC

$10,500.00
$10,500.00
Sale Sold out
Shipping calculated at checkout.

We will contact you within 24hrs for confirmation on the lead time on this product and also to ensure that this is the correct product for your vehicle.

lead times: If you purchase this product and it is not in stock in store but is available in country, the expected shipping time is 1 - 2 weeks. If the product is not in country, both air freight and sea freight options are available and the expected shipping time is estimated 2 - 16 weeks.

BDS 3.5 Inch Lift Kit | FOX Performance Elite Coil-Over | Chevy Silverado 1500 (19-25)

Enhance your Chevy Silverado or GMC Sierra 1500 with the BDS Suspension 3.5" lift kit featuring FOX Performance Elite 2.5 coil-over shocks. This upgrade allows for tire clearance up to 35" on Chevy models and 33" on GMC, delivering a more commanding stance and better off-road capability. The kit comes complete with everything needed for a smooth installation, boosting both your truck’s appearance and performance.

Up front the lift kit includes FOX 2.5 Performance Elite Series remote reservoir coil-over shocks and heavy duty tubular upper control arms for increased strength. In the rear this kit utilizes fabricated steel lift blocks, longer u-bolts and a complementary set of FOX 2.5 Performance shocks for the smoothest ride.

FOX Performance Elite

FOX 2.5 Performance Elite shocks offer next level performance for on-road comfort and off-road comfort capability. Tuned and ready to install right out of the box, these bolt-on 2.5-inch diameter shocks are built for abuse and packed with race-proven technology. They include a remote reservoir for additional fluid capacity to keep your shocks running cool so you can push the limits in the rough terrain. The DSC adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs, offering 10 separate low-speed and 12 high-speed compression levels, with a black anodized aluminium reservoir to increase cooling efficiency.

HD Upper Control Arms (UCAs)

Built for strength, performance and increased travel, these upper control arms are ready to bolt-in with most leveled/lifted trucks. They use 1.5" OD x .120-wall tubular construction with an indexed ball joint cup to correct the ball joint positioning allowing additional down travel and camber adjustment. At the frame mounting ends are durometer-specific rubber bushings for maintenance-free operation while at the other end a quality greaseable ball joints for smooth, quiet operation and superior durability. Arms are finished in a durable black powder coat with a billet aluminum dust cap ready for installation right out of the box.

Specifications

Front Lift Method : Coil-Over
Rear Lift Method : Block
Shocks Included : Yes
Front Lift Height : 3.5"
Rear Lift Height : 2.5"

Features

Features & Benefits

FOX 2.5 Performance Elite coil-overs offer improved damper performance over stock
DSC Adjuster allows easy high-speed and low-speed compression tuning for optimal performance in any terrain
Performance UCAs increase strength and allow for more suspension travel
FOX 2.5 performance series IFP rear shocks included
Factory Protection Plus drivetrain warranty included
Easy, 100% Bolt on installation.

Vehicle Suitability

Installation

Estimated time: 4-5 hours

Difficulty Level: Moderate

NOTE: For the OK by Zone Offroad and BDS Kits with 2.5" Remote Res shocks, please add 2 hours extra for all kits for fitment. It takes a little longer to mount the remote reservoirs compared to the standard shocks.

Installation Notes

Recommendations

Recommended Tyres & Wheels

33 x 12.5 with 20 x 9 and 5.5 in. Backspace
35 x 12.5 with 20 x 9 and 5.5 in. Backspace

What's In The Box

Important Notes

5.5" max wheel backspacing can be used
Will fit Trail Boss/AT4 models however will net 1.5" of lift over factory ride height
All aftermarket wheels should be test fit prior to mounting the tire to ensure proper clearance to the brake caliper. Some wheel profiles will not clear the brake caliper. These can be test fitted before the vehicle is lifted in a stock condition
Will NOT fit models with a single leaf spring (monoleaf) rear suspension.
If your vehicle has been modified with new leaf springs, the u-bolts with the Rear Spacer Block Kits may not be long enough. This lift kit is sold under the provision that the rear suspension has not yet been altered. If you need longer u-bolts, you may need to take the measurements and source some alternatives.

Collapsible row

Installation Guide
View full details