{"product_id":"b-tec-400amp-12v-lifepo4-bt-slim-metal-case-battery","title":"B-TEC 400amp \/ 12v LiFePO4 BT Slim Metal Case Battery","description":"Available in 12V 100Ah, 200Ah, 300Ah and 400Ah capacities and 24V 100Ah \u0026amp; 36v 100Ah, the B-TEC lithium battery is designed and intended for use in deep cycle applications.\n5 Year Warranty\n\u0026gt;2500 Charge Cycles @ 80% DOD\nBluetooth Monitoring via Phone App\nBuilt-In Reset Button making re-starting a flat battery a breeze\nNOTE. PLEASE CHARGE BATTERIES FULLY BEFORE USE.\nFeatures\nEnerdrive Dometic B-TEC LiFeP04 12v 200Ah Slimline Lithium Battery\nThe new 200Ah ePOWER B-TEC Slimline lithium battery is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity.\nExtremely compact size W 530 x H 600 x D 83 mm. All connection points for the battery are at one end including all Comms Ports and Reset Port.\nReset button is not included on the battery itself, we have opted for a button that can be remotely mounted elsewhere in the install. This allows for a much easier restart process for customers and also keeps the battery more water tight with less chance of water ingress.\nComms Ports are both RJ45 remote ports with CAN output. Both are reserved for future integration and functionality.\nWater resistant metal casing meeting IP52 rating and all external bolts and fittings are blind so limits the chance for water to travel from external to internal. Rubber style seals between all metal framing. Frames overlap as well to help avoid water ingress.\nSmart Phone Monitoring System\nThe Enerdrive B-TEC Slimline battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information;\nBattery Capacity\nBattery Voltage\nBattery Current (Amps)\nBattery State of Charge (SOC)\nBattery State of Health (SOH)\nBattery Status\nIndividual Cell Voltage\nBattery Temperature\nBattery Cycles\nBattery Alarms\nBattery Event Information\nBattery Management System\nThe battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature \u0026amp; short circuit. The BMS helps to ensure safe and accurate operation of the battery. Please note that a fully discharged battery (BMS is off) requires charging within 14 days to avoid cell damage.\nSize \u0026amp; Weight Savings\nLithium v AGM Capacities;\n100Ah Lithium = 160Ah AGM\n125Ah Lithium = 200Ah AGM\n200Ah Lithium = 320Ah AGM\n300Ah Lithium = 480Ah AGM\n(Based on standard depth of discharge for both Lithium (80%) and AGM (50%).\nThe Enerdrive B-TEC battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative.\nThe Enerdrive B-TEC Slimline battery is perfect for camper trailers, 4WD’s (AUX battery), caravans, small water craft, low power communication sites or any other application that requires the use of a single deep cycle battery that meets the amp hour capacity.\nWith over a decade of researching, designing and testing lithium batteries and the associated charging systems, Enerdrive are at the forefront of lithium battery systems in Australia. Enerdrive are the only Australian company that can supply a fully integrated self-branded energy system to suit your setup.\nWith thousands of complete systems in operation Australia wide, Enerdrive | Dometic is regarded as the leader in the field of lithium batteries and energy systems for Mobile, Marine and Remote applications.\nPlease Note; The B-TEC Slimline battery is capable to be paralleled to a second B-TEC 12V 200Ah Slimline Lithium Battery. For maximum performance and lifespan of your B-TEC Slimline battery, no more than 4 batteries should be connected together to increase your overall capacity. Overall loads when paralleled should not exceed the current limits of a single battery’s BMS.\nThe 200Ah Slimline battery is able to accept a maximum inverter capacity of 3000W only. Exceeding the maximum inverter capacity can damage the BMS Management within the battery.\nIf you are requiring a battery system larger than Enerdrive B-TEC battery, please look at the Enerdrive Pro Series Power Pack Systems which can offer multiple parallel and series connections with Active Cell Balancing Protection across the entire pack.\nPlease note B-TEC batteries must not be installed –\n• In vehicle engine bays or in high heat environments, refer to Section 10 – Battery Specifications of the manual.\n• In wet areas such as caravan chassis mounts, open ute trays or boat deck areas.\n• Inside compartments dedicated to carrying gas.\nThis product is not suitable to mount anywhere with a possibility of being exposed to the elements. It is an electronic product designed for internal use ONLY.\n2023 Standards Update: With some confusion regarding the up coming standards changes and how they will effect battery fitments for future builds including upgrades to existing builds, ENERDRIVE | DOMETIC have created a fitment guide. This guide is specific to our e-LITE and B-TEC range of batteries and has been designed to cover all portions of the battery installation requirements within the new standard. Please note this guide is specific to Enerdrive batteries and does not apply to any other manufacturer.\nSpecifications\nSKU\nEPL-100BT-12V-SLIM\nEPL-200BT-12V-SLIM\nEPL-300BTM-12V\nEPL-400BTM-12V\nNominal Voltage\n12.8V\n12.8V\n12.8V\n12.8V\nNominal Capacity\n100Ah\n200Ah\n300Ah\n400Ah\nCharge Cycles \n(DOD – 80% under controlled conditions)\n\u0026gt;2500 Cycles\n\u0026gt;2500 Cycles\n\u0026gt;2500 Cycles\n\u0026gt;2500 Cycles\nStandard Charge Specification\n(Lithium profile charger required)\nBattery Charge Temperature\n0 ̴ 45°C\n0 ̴ 45°C\n0 ̴ 45°C\n0 ̴ 45°C\nNormal Charge Voltage CV\/CC*\n14.20 ̴ 14.60V\n14.20 ̴ 14.60V\n14.20 ̴ 14.60V\n14.20 ̴ 14.60V\nStandby (Float) Voltage\n13.50 ̴ 13.80V\n13.50 ̴ 13.80V\n13.50 ̴ 13.80V\n13.50 ̴ 13.80V\nMaximum Charge Current\n80A @ 25°C for 30mins\n150A @ 25°C for 30mins\n150A @ 25°C for 30mins\n150A @ 25°C for 30mins\nRecommended Charge Current for Maximum Life\n20A-50A\n60A-120A\n60A-120A\n60A-120A\nStandard Discharge Specification\nBattery Discharge Temperature\n-20 ̴ 60°C\n-20 ̴ 60°C\n-20 ̴ 60°C\n-20 ̴ 60°C\nBattery Output Voltage Range\n11.00 ̴ 14.60V\n11.00 ̴ 14.60V\n11.00 ̴ 14.60V\n11.00 ̴ 14.60V\nMaximum Discharge Current\n100A@25°C ± 5°C for 30mins\n250A@25°C ± 5°C for 30mins\n250A@25°C ± 5°C for 30mins\n250A@25°C ± 5°C for 30mins\nPulse Discharge Current\n250A for 1.0s\n450A for 1.0s\n450A for 1.0s\n450A for 1.0s\nDischarge Cut-off Voltage\n\u0026lt;11.20V\n\u0026lt;11.20V\n\u0026lt;11.20V\n\u0026lt;11.20V\nCircuit Protection\nThe battery is supplied with a LiFePO4 Battery Management System BMS that can monitor and optimize each single prismatic cell during charge \u0026amp; discharge, to protect the battery pack from overcharge, over discharge \u0026amp; short circuit. Overall, the BMS helps to ensure safe and accurate operation of the battery.\nThe battery is supplied with a LiFePO4 Battery Management System BMS that can monitor and optimize each single prismatic cell during charge \u0026amp; discharge, to protect the battery pack from overcharge, over discharge \u0026amp; short circuit. Overall, the BMS helps to ensure safe and accurate operation of the battery.\nThe battery is supplied with a LiFePO4 Battery Management System BMS that can monitor and optimize each single prismatic cell during charge \u0026amp; discharge, to protect the battery pack from overcharge, over discharge \u0026amp; short circuit. Overall, the BMS helps to ensure safe and accurate operation of the battery.\nThe battery is supplied with a LiFePO4 Battery Management System BMS that can monitor and optimize each single prismatic cell during charge \u0026amp; discharge, to protect the battery pack from overcharge, over discharge \u0026amp; short circuit. Overall, the BMS helps to ensure safe and accurate operation of the battery.\nOver-Charge Protection\nOver-charge Protection Per Cell\n3.75V ± 0.03V\n3.75V ± 0.03V\n3.75V ± 0.03V\n3.75V ± 0.03V\nOver-charge Release Per Cell\n3.60V ± 0.05V\n3.60V ± 0.05V\n3.60V ± 0.05V\n3.60V ± 0.05V\nOver-charge Release Method\nDischarge below release voltage\nDischarge below release voltage\nDischarge below release voltage\nDischarge below release voltage\nOver-Discharge Protection\nOver-discharge Protection Per Cell\n2.80V ± 0.05V\n2.80V ± 0.05V\n2.80V ± 0.05V\n2.80V ± 0.05V\nOver-discharge Release Per Cell\n3.20V ± 0.05V\n3.20V ± 0.05V\n3.20V ± 0.05V\n3.20V ± 0.05V\nOver-discharge Release Method\nApply Charge\/Voltage \u0026gt;12.8V\nApply Charge\/Voltage \u0026gt;12.8V\nApply Charge\/Voltage \u0026gt;12.8V\nApply Charge\/Voltage \u0026gt;12.8V\nOver Current Protection\nDischarge Over Current\n280A for 25s – 400A for 3.5s\n280A for 25s – 400A for 3.5s\n280A for 25s – 400A for 3.5s\n280A for 25s – 400A for 3.5s\nProtection Reset Time\n5s Auto Release\n5s Auto Release\n5s Auto Release\n5s Auto Release\nOver Current Release Method\nDisconnect Load\nDisconnect Load\nDisconnect Load\nDisconnect Load\nOver Temperature Protection\nBattery Discharge Over Temperature\nProtection to 65°C ± 5°C\nProtection to 65°C ± 5°C\nProtection to 65°C ± 5°C\nProtection to 65°C ± 5°C\nRelease at 50°C ± 5°C\nRelease at 50°C ± 5°C\nRelease at 50°C ± 5°C\nRelease at 50°C ± 5°C\nBattery Charge Over Temperature\nProtection to 55°C ± 5°C\nProtection to 55°C ± 5°C\nProtection to 55°C ± 5°C\nProtection to 55°C ± 5°C\nRelease at 45°C ± 5°C\nRelease at 45°C ± 5°C\nRelease at 45°C ± 5°C\nRelease at 45°C ± 5°C\nShort Circuit Protection\nAuto release after 5s\nAuto release after 5s\nAuto release after 5s\nAuto release after 5s\nMechanical Characteristics\nDimensions\nLength 551mm\nLength 530mm\nLength 630mm\nLength 630mm\nDepth 109mm\nDepth 83mm\nDepth 176.5mm\nDepth 216.5mm\nHeight 137mm\nHeight 600mm\nHeight 498mm\nHeight 498mm\nWeight\n13.7 kg\n31.34 kg\nApprox 48 Kg\nApprox 60 Kg\nCase Construction\nHigh Impact ABS Plastic\nPowder Coated Zinc Plate\nPowder Coated Zinc Plate\nPowder Coated Zinc Plate\nStorage Information\nTemperature \u0026amp; Humidity Range\n\u0026lt;30 days -20°C ̴ 60°C, 5 ̴ 75% RH\n\u0026lt;30 days -20°C ̴ 60°C, 5 ̴ 75% RH\n\u0026lt;30 days -20°C ̴ 60°C, 5 ̴ 75% RH\n\u0026lt;30 days -20°C ̴ 60°C, 5 ̴ 75% RH\n\u0026gt;30 days -10°C ̴ 45°C, 5 ̴ 75% RH\n\u0026gt;30 days -10°C ̴ 45°C, 5 ̴ 75% RH\n\u0026gt;30 days -10°C ̴ 45°C, 5 ̴ 75% RH\n\u0026gt;30 days -10°C ̴ 45°C, 5 ̴ 75% RH\nWarranty\n5 Years\n5 Years\n5 Years\n5 Years\nNote: Specifications subject to change without notice.\nCharge Cycles Disclaimer:\nThe information provided regarding the life cycles of Enerdrive | Dometic lithium batteries is based on laboratory testing conducted under controlled conditions. These tests were carried out at a consistent temperature of 25°C, with discharge and charge rates set at 1C (1 x Capacity of battery).\nUnder these specific conditions, it has been calculated that our lithium batteries can achieve over 2500 cycles with approximately 80% of original capacity remaining. However, it’s essential to note that actual performance may vary depending on various factors, including but not limited to, installation environment, temperature fluctuations, and variations in discharge and charge rates.\nIt is recommended to avoid excessive discharges and charge cycles and to maintain a discharge and charge rate around 0.5C (0.5 x Capacity of battery) for optimal battery longevity. Doing so may result in a significantly higher cycle count.\nPlease be aware that the numbers provided are based on cell-level testing and may not directly reflect the performance of your specific battery installation. As such, we advise users to consider their individual circumstances when assessing the expected lifespan of their batteries.\nEven in the scenario of reaching 2500 cycles, it’s important to understand that the lifespan of the batteries can extend beyond this figure. For instance, if batteries were fully discharged daily, a lifespan of over 6.8 years could still be expected. If you don’t normally take the battery under normal use below 30% SOC, then you could find that the battery will continue to meet your needs for many cycles to come.\nFor further guidance on maximising the performance and longevity of Enerdrive | Dometic lithium batteries, please consult our technical support team or refer to the user manual.\nAccessories\nExtend Your System\nAC Battery Charger\nDC2DC Battery Charger Including MPPT Solar Controller\nLow Battery Cutout\n400-2000w ePOWER Inverter\nDownloads\nEnerdrive B-TEC Lithium Battery User Manual\nENERDRIVE | DOMETIC Guide for Fitting Batteries\nWiring Diagram – How to wire the Battery Reset Switch","brand":"Enerdrive","offers":[{"title":"Default Title","offer_id":53982042423585,"sku":"EPL-400BTM-12V","price":5064.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0967\/3703\/4529\/files\/4_786ce486-c5e2-4ab6-b14a-c801c6c8ee75.jpg?v=1792461933","url":"https:\/\/toughtrucks.com.au\/products\/b-tec-400amp-12v-lifepo4-bt-slim-metal-case-battery","provider":"Tough Trucks Australia","version":"1.0","type":"link"}