{"product_id":"enerdrive-epro-combi-24-3500-70","title":"Enerdrive ePRO Combi 24\/3500-70","description":"The main task of the ePRO Combi Inverter Charger is to act as an uninterruptible AC power supply (UPS). In case of a grid\/generator failure or disconnection, the ePRO Combi immediately stops charging the battery, releases the AC transfer switch and activates the inverter which takes over the supply to the connected loads. All this is achieved so fast, that even very critical loads like computers will continue to operate without any problems. In case the grid\/generator is reconnected again and the voltage and frequency are within acceptable limits, the ePRO Combi activates the AC transfer switch and battery charger again, while deactivating the inverter. The connected loads are now supplied again by the grid\/generator without any interruption. Available in 12v and 24v models and ranging in sizes from 1600-3500w inverter output and 35-120A charger output, the ePRO Combi has a unit to suit nearly any application.\nFeatures\nThe main task of the ePRO Combi Inverter Charger is to act as an uninterruptible AC power supply (UPS). In case of a grid\/generator failure or disconnection, the ePRO Combi immediately stops charging the battery, releases the AC transfer switch and activates the inverter which takes over the supply to the connected loads. All this is achieved so fast, that even very critical loads like computers will continue to operate without any problems. In case the grid\/generator is reconnected again and the voltage and frequency are within acceptable limits, the ePRO Combi activates the AC transfer switch and battery charger again, while deactivating the inverter. The connected loads are now supplied again by the grid\/generator without any interruption.\nAvailable in 12v, 24v or 48v models and ranging in sizes from 1600-3500w inverter output and 35-120A charger output, the ePRO Combi has a unit to suit nearly any application.\nAdditionally, the ePRO Inverter Charger offers features like :\nAC Input Power Boost, which temporarily assists weak AC input sources when the connected load needs more power than available from the grid or generator.\nAC Input Current Limit, which limits the maximum current consumed from the AC input source by the ePRO Combi. This limit is user adjustable.\nPower Factor Corrected AC Input, which optimizes energy efficiency and makes sure that the maximum amount of charging current is available from your AC source.\nIntelligent 4-stage charge programs, user programmable to fit any battery type.\nFully programmable inverter, transfer switch and battery charger parameters, using the Dashboard for Windows software.\nProgrammable alarm relay, for optimal control of external devices like generator starting or selective load disconnection.\nFreely assignable trigger input, which allows the user to control the ePRO Combi by external events.\nTemperature controlled fans, to guarantee silent operation under less than full load conditions.\nTemperature compensated battery charging, using the standard supplied battery temperature sensor for maximum battery lifetimes.\nWhen installation space is at a premium, but maximum performance is required then look no further than the ePRO Combi range. With so many internal features the ePRO Combi will provide you with all the requirements for on-board power along with:\nAC Input Power Boost – The ePRO Combi is capable of temporarily assisting weak AC input sources when more power is needed than available (i.e. from small generators). This is beneficial when larger loads than both the generator or the inverter on their own could support; so let the ePRO Combi combine both of the AC sources for maximum load support capability.\nAC Input Current Limit – For those times when you have limited AC supply (i.e. portable generators), you can set the ePRO Combi to only charge at a maximum rate.\nAlarm Output Relays – Providing full configuration options for the alarm contacts PLUS convert external trigger commands into a number of ePRO Combi status changes.\nAlso available on the larger 2000-3500w Combi’s are two fully configurable 16A 230v alarm relay outputs for controlling large AC loads like air conditioning. Along with two unique trigger inputs, it gives the end user virtually unparalleled control of their Enerdrive ePRO “Power Station”.\nUniversal Remote Control\nThe Universal Remote Control (URC) can be used to remotely readout all available parameters from your ePRO inverter\/charger Combi, like charging current, output voltage, charge stage etc. It is also possible to put the Combi in standby mode or to wake it up again, besides being able to control the maximum charge current and the maximum AC input current. All information is shown on a clear white backlit graphical display. This kit comes with mounting screws and a 3 meter interface cable (standard cat5 patch cable). The URC automatically recognizes to which type of equipment it is connected.\nApplications\nRecreational vehicles – With a very small size footprint for power output, the ePRO Combi is the perfect solution for tight installations.\nSolar Power Systems – Suitable for small back up sites that require variable control capabilities with the innovative Trigger Switches.\nIndustrial Systems – Any small commercial application can be configured to use the ePRO Combi as a smart UPS system again using the Trigger Switches.\nCommercial work vehicles – Provide ultra clean AC power for sensitive equipment.\nMarine Systems – Great charging capabilities from a small unit.\nSpecifications\nePRO Combi Inverter Charger Specifications\n1600W\/60A 12V ePRO Combi Inverter Charger\n1800W\/35A 24V ePRO Combi Inverter Charger\n3000W\/120A 12V ePRO Combi Inverter Charger\n3500W\/70A 24V ePRO Combi Inverter Charger\nSKU\nEPC-1600-12\nEPC-1800-24\nEPC-3000-12\nEPC-3500-24\nOutput power (VA)\n1600VA\n1800VA\n3000VA\n3500VA\nOutput power (1) Pnom\n1300W\n1400W\n2600W\n2800W\nP10minutes\n1600W\n1800W\n3200W\n3800W\nPsurge\n2500W\n3000W\n5000W\n6500W\nOutput voltage \/ frequency\n230 Vac ± 2% \/ 50 Hz ± 0.05%\n230 Vac ± 2% \/ 50 Hz ± 0.05%\n230 Vac ± 2% \/ 50 Hz ± 0.05%\n230 Vac ± 2% \/ 50 Hz ± 0.05%\nOutput waveform\nTrue Sine Wave (THD \u0026lt; 5% 1 @ Pnom)\nTrue Sine Wave (THD \u0026lt; 5% 1 @ Pnom)\nTrue Sine Wave (THD \u0026lt; 5% 1 @ Pnom)\nTrue Sine Wave (THD \u0026lt; 5% 1 @ Pnom)\nInput voltage (± 3% tolerance): Nominal\n12V\n24V\n12V\n24V\nRange\n10.5 (2) – 16 Vdc\n21 (2) – 32 Vdc\n10.5 (2) – 16 Vdc\n21 (2) – 32 Vdc\nMaximum efficiency\n92%\n94%\n92%\n93%\nNo load power consumption (2) [ASB]\n\u0026lt;10 W [2.0 W]\n\u0026lt;12 W [2.0 W]\n\u0026lt;20 W [3.5 W]\n\u0026lt;20 W [4.0 W]\nCharger stage\nAC input voltage\n185 – 270 Vac \/ 45 – 65 Hz \/ PF \u0026gt; 0.95\n185 – 270 Vac \/ 45 – 65 Hz \/ PF \u0026gt; 0.95\n185 – 270 Vac \/ 45 – 65 Hz \/ PF \u0026gt; 0.95\n185 – 270 Vac \/ 45 – 65 Hz \/ PF \u0026gt; 0.95\nMaximum continuous charging current (4)\n60A\n35A\n120A\n70A\nStandard charge voltage (bulk \/ float @ 25°C)\n14.3V \/ 13.3V (programmable)\n28.6V \/ 26.6V (programmable)\n14.3V \/ 13.3V (programmable)\n28.6V \/ 26.6V (programmable)\nCharge algorithm\nIUoUoP, intelligent 4-stage, temperature compensated (programmable)\nIUoUoP, intelligent 4-stage, temperature compensated (programmable)\nIUoUoP, intelligent 4-stage, temperature compensated (programmable)\nIUoUoP, intelligent 4-stage, temperature compensated (programmable)\nAC Transfer Switch\nMaximum continuous current\n16 Ams\n16 Ams\n30 Ams\n30 Ams\nTransfer time (typical)\n0 ms (inverter to mains) \/ \u0026lt;5 ms (mains to inverter)\n0 ms (inverter to mains) \/ \u0026lt;5 ms (mains to inverter)\n0 ms (inverter to mains) \/ \u0026lt;5 ms (mains to inverter)\n0 ms (inverter to mains) \/ \u0026lt;5 ms (mains to inverter)\nGeneral\nePROLink enabled\nYes\nYes\nYes\nYes\nProtections\nhigh\/low battery voltage, high temperature, overload, short circuit, high ripple voltage and low AC input voltage\nhigh\/low battery voltage, high temperature, overload, short circuit, high ripple voltage and low AC input voltage\nhigh\/low battery voltage, high temperature, overload, short circuit, high ripple voltage and low AC input voltage\nhigh\/low battery voltage, high temperature, overload, short circuit, high ripple voltage and low AC input voltage\nDC connections\nTwo wires, length 1.5 meters, 50mm2 - M8 bolt terminals\nTwo wires, length 1.5 meters, 50mm2 - M8 bolt terminals\nTwo wires, length 1.5 meters, 120mm2 - M10 bolt terminals\nTwo wires, length 1.5 meters, 120mm2 - M10 bolt terminals\nAC connections\nScrew terminals\nScrew terminals\nScrew terminals\nScrew terminals\nEnclosure body size\n351 x 210 x 114mm\n351 x 210 x 114mm\n370 x 431 x 132mm\n370 x 431 x 132mm\nTotal weight\n10.7 Kg\n10.7 Kg\n19.0 Kg\n19.0 Kg\nProtection class \/ operating temp. \/ storage temp.\nIP21 \/ -20°C.. +50°C \/ -40°C.. +80°C (humidity max. 95% non-condensing)\nIP21 \/ -20°C.. +50°C \/ -40°C.. +80°C (humidity max. 95% non-condensing)\nIP21 \/ -20°C.. +50°C \/ -40°C.. +80°C (humidity max. 95% non-condensing)\nIP21 \/ -20°C.. +50°C \/ -40°C.. +80°C (humidity max. 95% non-condensing)\nStandards\nComplies with IEC 60335-2-29 including Australian deviations.\nComplies with IEC 60335-2-29 including Australian deviations.\nComplies with IEC 60335-2-29 including Australian deviations.\nComplies with IEC 60335-2-29 including Australian deviations.\nNote: Specifications subject to change without notice.\nMeasured with resistive load at 25°C ambient. Power ratings are subject to a tolerance of 10% and are decreasing as temperature rises with a rate of approx. 1.2%\/°C starting from 25°C. Pnom is a typical value, measured using battery capacities of 200 Ah @ 12 V and 100 Ah @ 24V\nUndervoltage limit is dynamic. This limit decreases with increasing load to compensate the voltage drop across cables and connections.\nMeasured at nominal input voltage and 25°C.\nAt high ambient temperatures, maximum output current shall be reduced automatically.\nAccessories\nEnerdrive Part #\nDescription\n5095500\nUniversal Remote Control and Cable\n5092120\nePRO Link cable to connect to the ePRO Universal Remote Control or to a Windows device\n5092120\nTemperature Sensor (Included)\n5055630\nTBS Alarm expander board to suit ePro—expands alarm relays from 1 to 4\nNote: Specifications subject to change without notice.\nDownloads\nePRO Combi 1600 to 3500 User Manual (426kb)\nePRO Combi 2000 – 3500 Installation Guide (1.2mb)\nUniversal Remote Control Owner’s Manual (153kb)\nePRO Combi Sales Brochure\nAccessory Downloads\nTBS Alarm Output Expander Kit Guide (57kb)\nUnder the Bonnet\nEnerdrive Offers A New Innovative Trigger-Action Feature For The ePRO Combi Inverter \/ Charger Series\nAdd virtually unlimited control to your power system. The Trigger-action feature enables you to assign certain events (triggers) to user defined actions. You can for example configure the ePRO Combi to perform an action when a certain voltage, current or temperature level is reached, or perform an action when an external switch is closed or opened. This offers great flexibility and may in some cases avoid the need to invest in additional external hardware.\nA few practical examples are :\nDisable inverter mode using an external switch\nActivate a relay when the charger enters float mode\nStop charging using an external switch (i.e. from external BMS)\nTurn off an AC load when the inverter is overloaded\nOnly activate the transfer relay when the battery is almost empty\nTurn the AC Input boost function on or off depending on generator or mains supply (recommended so that the smart boost function does not run while connected to mains AC).\n*Programming kit required for setup of triggers; or speak to Enerdrive at time of ordering.\nDashboard\nConfigure and readout your ePROLink enabled devices\nSupports multiple Enerdrive ePRO devices\nCheck all settings, status and history data with just the click of a button\nUse the advanced data recording wizard to log all available parameters\nOutput logged data to Microsoft Excel for further analysis\nOpen individual readout\/control panels for each device with real time parameter info\nCreate custom charge programs\nRename your device (i.e. “Starter battery”, “Accessory bank charger”)\nMany new features will be added periodically\nWill be supplied along with each communication kit (USB or RS232)\nWindows XP, Vista and Windows 7 compatible\nApplications\nTool for installation and service engineers\nLarge screen real-time monitoring\nBattery analysis","brand":"Enerdrive","offers":[{"title":"Default Title","offer_id":53982039703841,"sku":"EPC-3500-24","price":4542.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0967\/3703\/4529\/files\/SMP_1540.jpg?v=1792461861","url":"https:\/\/toughtrucks.com.au\/products\/enerdrive-epro-combi-24-3500-70","provider":"Tough Trucks Australia","version":"1.0","type":"link"}