1.5 Ton Jack "Talon" Mounted System
The Talon Mounted System is Pro Eagle's smallest big-wheel jack and the stainless mount made for it.
The Talon is a 1.5 ton aluminium jack for mid-size trucks, Jeep, and UTV. It reaches full extension in four pumps. Composite wheels and a full-length steel skid keep it moving on gravel and dirt, and sealed boots keep grit out of the ram. At 17.2 kg and 584 mm long, it is the one that fits a tight toolbox or a swing-out carrier.
The lift arm is short. Without an extension the jack tops out at 12 in (305 mm). The 15 in extension is included and takes maximum height to 29 in (737 mm). On a low vehicle that extension can be too tall to slide underneath, and without it the jack can come up short. Measure the gap under your lift point before you buy.
The 2.0 mount is stainless steel, a little larger than the jack at about 24 × 5.5 in. Four holes bolt it down. It holds the jack, the handles, and the extension, with a cover, two anti-rattle straps, and a safety pin. An optional tool kit fits in the bed of the mount, and a padlock can be added.
In the box
- 1.5 ton Talon jack
- 15 in (381 mm) extension
- Stainless 2.0 mount, cover, and two anti-rattle straps
Jack
- Capacity: 1.5 ton (3,000 lb / 1,361 kg)
- Minimum height: 5.5 in (140 mm)
- Height without an extension: 12 in (305 mm)
- Height with the included 15 in extension: 29 in (737 mm)
- Weight: 38 lb (17.2 kg)
- Size: 23 × 10 × 5.5 in (584 × 254 × 140 mm)
- Material: aluminium
- Warranty: 2 years
- Standard: ASME-PASE
Mount
- Stainless steel, about 24 × 5.5 in (610 × 140 mm)
- Four pre-drilled holes
- Cover, two anti-rattle straps, and a safety pin
- Holds the jack, handles, and extension
- Room for the optional tool kit, padlock-ready
- Choosing a selection results in a full page refresh.
- Opens in a new window.
Compare
| Product | SKU | Description | Collection | Availability | Product type | Other details |
|---|
