B-TEC 100amp / 24v LiFePO4 Battery BT

Available in 12V 100Ah, 125Ah, 200Ah, 300Ah and 400Ah capacities and 24V 100Ah, 150Ah & 36v 100Ah, the B-TEC lithium battery is designed and intended for use in deep cycle applications. 5 Year Warranty >2500 Charge Cycles @ 80% DOD Bluetooth Monitoring via Phone App NOTE. PLEASE CHARGE BATTERIES FULLY BEFORE USE. Features ePOWER B-TEC LiFeP04 24v 100Ah Lithium Battery Available in 12v 100Ah, 125Ah, 200Ah and 300Ah capacities and 24v 100Ah & 36v 100Ah, the ePOWER B-TEC lithium battery is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity. Smart Phone Monitoring System The Enerdrive ePOWER B-TEC battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information; Battery Capacity Battery Voltage Battery Current (Amps) Battery State of Charge (SOC) Battery State of Health (SOH) Battery Status Individual Cell Voltage Battery Temperature Battery Cycles Battery Alarms Battery Event Information Battery Management System The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery. Size & Weight Savings Lithium v AGM Capacities; 100Ah Lithium = 160Ah AGM 125Ah Lithium = 200Ah AGM 200Ah Lithium = 320Ah AGM 300Ah Lithium = 480Ah AGM (Based on standard depth of discharge for both Lithium (80%) and AGM (50%). The ePOWER B-TEC battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative. The ePOWER B-TEC battery is perfect for camper trailers, 4WD’s (AUX battery), caravans, low power communication sites or any other application that requires the use of a single deep cycle battery that meets the amp hour capacity. With over 7 years of researching, designing and testing lithium batteries and the associated charging systems, Enerdrive are at the forefront of lithium battery systems in Australia. Enerdrive are the only Australian company that can supply a fully integrated self-branded energy system to suit your setup. With thousands of complete systems in operation Australia wide, Enerdrive is regarded as the leader in the field of lithium batteries and energy systems for Mobile, Marine and Remote applications. Please Note; The ePOWER B-TEC battery is capable to be paralleled to a second ePOWER B-TEC battery of the same size. For maximum performance and lifespan of your ePOWER B-TEC battery, no more than 2 batteries should be connected together to increase your overall capacity. Overall loads when paralleled should not exceed the current limits of a single batteries BMS. The 100Ah battery is able to accept a maximum inverter capacity of 2000W only. Exceeding the maximum inverter capacity can damage the BMS Management within the battery. If you are requiring a battery system larger than ePOWER B-TEC battery, please look at the Enerdrive Pro Series Power Pack Systems which can offer multiple parallel and series connections with Active Cell Balancing Protection across the entire pack. This product is not suitable to mount anywhere with a possibility of being exposed to the elements. It is an electronic product designed for internal use ONLY. Specifications Normal Specification EPL-100BT-24V Nominal Voltage 25.6V Nominal Capacity 100Ah Cycle Life (DOD – 80% under controlled conditions) >2500 Cycles Standard Charge Specification (Lithium profile charger required) Battery Charge Temperature 0 ̴ 45°C Normal Charge Voltage CV/CC* 28.80 ̴ 29.20V Standby (Float) Voltage 27.00 ̴ 27.60V Maximum Charge Current 50A @ 25°C for 30mins Recommended Charge Current for Maximum Life ≤33A Standard Discharge Specification Battery Discharge Temperature -20 ̴ 60°C Battery Output Voltage Range 22.00 ̴ 29.20V Maximum Discharge Current 100A @ 25°C ± 5°C for 30mins Pulse Discharge Current 450A for 1.0s Discharge Cut-off Voltage ≤22.40V Circuit Protection The battery is supplied with a LiFePO4 Battery Management System BMS that can monitor and optimize each single prismatic cell during charge & discharge, to protect the battery pack from overcharge, over discharge & short circuit. Overall, the BMS helps to ensure safe and accurate operation of the battery. Over-Charge Protection Over-charge Protection Per Cell 3.90V ± 0.03V Over-charge Release Per Cell 3.60V ± 0.05V Over-charge Release Method Discharge below release voltage Over-Discharge Protection Over-discharge Protection Per Cell 2.80V ± 0.05V Over-discharge Release Per Cell 3.20V ± 0.05V Over-discharge Release Method Apply Charge/Voltage ≥25.6V Over Current Protection Discharge Over Current 110A for 30s – 450A for 1s Protection Reset Time 5s Auto Release Over Current Release Method Disconnect Load Over Temperature Protection Battery Discharge Over Temperature Protection to 65°C ± 5°C Release at 50°C ± 5°C Battery Charge Over Temperature Protection to 55°C ± 5°C Release at 45°C ± 5°C Short Circuit Protection Auto release after 5s Mechanical Characteristics Dimensions Length 485mm Width 170mm Height 245mm Weight Approx 25.0 Kg Storage Information Temperature & Humidity Range ≤ 30 days -20°C ̴ 60°C, 5 ̴ 75% RH ≥ 90 days -10°C ̴ 45°C, 5 ̴ 75% RH Self-discharge Rate ≤ 3% Per Month Note: Specifications subject to change without notice. Accessories Extend Your System AC Battery Charger DC2DC Battery Charger Including MPPT Solar Controller Low Battery Cutout 400-2000w ePOWER Inverter Downloads Enerdrive B-TEC Lithium Battery User Manual B-TEC Lithium Battery Brochure