Enerdrive MPPT Solar Controller w/Display - 20Amp 12/24V

The Enerdrive | Dometic MPPT Solar Controllers adopt the advanced MPPT control algorithm, it can minimise the maximum power point loss rate and loss time, quickly track the maximum power point (MPP) of the PV array and obtain the maximum energy from solar array under any conditions; and it can increase the ratio of energy utilisation in the solar system by 20%-30% compared with PWM charging method. The Enerdrive MPPT Solar Controllers has self-adaptive three-stage charging mode based on digital control circuit, which can effectively prolong the lifespan of batteries and significantly improve the system performance. It also has comprehensive electronic protection for overcharge, over discharge, PV & battery reverse polarity. This controller can be widely used for RV, Marine, remote off grid monitoring and many other applications. IP33 Ingress protection and isolated RS485 design further improves the controller’s reliability and meet the different application requirements. Additional information Maximum Battery Current Output 20A, 30A, 40A Features The Enerdrive MPPT Solar Controllers adopt the advanced MPPT control algorithm, it can minimize the maximum power point loss rate and loss time, quickly track the maximum power point (MPP) of the PV array and obtain the maximum energy from solar array under any conditions; and it can increase the ratio of energy utilization in the solar system by 20%-30% compared with PWM charging method. The Enerdrive MPPT Solar Controllers has self-adaptive three-stage charging mode based on digital control circuit, which can effectively prolong the lifespan of batteries and significantly improve the system performance. It also has comprehensive electronic protection for overcharge, over discharge, PV & battery reverse polarity. This controller can be widely used for RV, Marine, remote off grid monitoring and many other applications. IP33 Ingress protection and isolated RS485 design further improves the controller’s reliability and meet the different application requirements. Enerdrive MPPT Solar Controller Features: CE certification (LVD EN/IEC62109,EMC EN61000-6-1/3) LCD display Advanced MPPT technology & ultra-fast tracking speed guarantee’s tracking efficiency up to 99.5% Maximum DC/DC transfer efficiency is as high as 98.6%. Advanced MPPT control algorithm to minimize the MPP lost rate and lost time Accurate recognition and tracking of multi-peaks maximum power point Wide MPP operating voltage range Support lead-acid and lithium batteries Real-time energy statistics function Power reduction automatically over temperature value Multiple load work modes Comprehensive electronic protection IP33 Ingress protection Comms port included for future applications Specifications Enerdrive MPPT Solar Charge Controllers SKU EN43510 (discontinued) EN43520 EN43530 EN43540 Nominal Voltage Range 12/24VDC Auto Select ¹ Battery Voltage Range 8 ~ 32V Maximum Battery Current Output 10A 20A 30A 40A Maximum Load Current Output 10A 20A 30A 40A Maximum PV Open Circuit Voltage 100V ² 92V ³ MPPT Voltage Range (Battery Voltage + 2V) - 72V Maximum PV Array Power Recommended 150W/12V 300W/24V 300W/12V 600W/24V 450W/12V 900W/24V 600W/12V 1200W/24V Maximum PV Array Power Allowed (Overdrive) 180W/12V 360W/24V 360W/12V 720W/24V 540W/12V 1080W/24V 720W/12V 1440W/24V Efficiency (Maximum) 98.20% 98.30% 98.60% 98.60% Self Consumption ≤30mA (12V) ≤16mA (24V) Temperature Compensate Coeffcient ⁴ -3mV/°C/12V (Default) Grounding Common Negative RS485 Interface 5VDC/200mA (RJ45) LCD Backlight Timeout Default: 60S, Range,: 0~999S (OS: the backlight is ON all the time) ENVIRONMENTAL PARAMETERS Environmental Temperature ⁵ -25°C ~ +50°C Storage Temperature Range -20°C ~ +70°C Relative Humidity ≤95%, N.C. IP Rating IP33 MECHANICAL PARAMETERS Dimensions (mm) LxWxH 175 x 143 x 48 217 x 158 x 56.5 230 x 165 x 63 255 x 185 x 67.8 Mounting Hole Dimensions (mm) 120 x 134 160 x 149 173 x 156 200 x 176 Mounting Hole Size ɸ5mm Maximum Cable Size (Connector Input/Output) 12AWG (4mm²) 10AWG (6mm²) 8AWG (10mm²) 6AWG (13.2mm²) Recommended Cable Size (Connector Input/Output) 12AWG (4mm²) 10AWG (6mm²) 8AWG (10mm²) 6AWG (13.2mm²) 1. When lithium battery is used, the system voltage can’t be identified automatically. 2. At minimum operating environment temperature. 3. At 25°C environment temperature. 4. When lithium battery is used, the temperature compensate coefficient must be 0, and can’t be changed. 5. The controller can supply full load working in the environment temperature. When the internal temperature reaches 81°C, the reduced charging power mode is turned on. Downloads Enerdrive MPPT 10-40A Solar Charge Controller Manual (923kb)