LOGIQ Ford F-150 Rear Airbag Kit (2015+) – Air Springs Only

The LOGIQ Air Spring Kit for the 2015+ Ford F-150 is a rear airbag kit engineered specifically for Ford's half-ton. It comes 100% factory assembled and ready to install. A single air sleeve on each side mounts to the factory leaf springs and gives your F-150 up to 3,200lb (approx. 1,451kg) of load capacity at 150psi for towing and hauling.

The kit is designed to give maximum suspension travel while still using your factory bump stops, so the truck rides like stock when it's empty and stays level and stable when it's loaded. Run the pressure low for daily driving and pump it up when you're hitching a caravan, a boat or a camper trailer, or loading up the tub.

This listing is for the air spring kit only. It includes a manual inflation kit so you can fill the bags with an air line. For phone or in-cab control, we fit the AirIQ SD2 for airbag-only setups. If you want an air tank as well, we always step up to the AirIQ HD2. Either way, we recommend adding the AirIQ Remote for a physical controller on your sun visor.

Why Fit Airbags to Your F-150

• Built for the half-ton. It's engineered specifically for the 2015+ F-150, with 3,200lb (approx. 1,451kg) of load capacity at 150psi.
• Stock ride when empty. It keeps maximum suspension travel and uses your factory bump stops.
• Level, stable towing. Pump the bags up to take out rear sag when you're hitched up or loaded.
• Adjustable to the load. Run pressure anywhere from 5psi to 150psi.
• Factory assembled. It arrives ready to install, with vehicle-specific hardware.
• Limited lifetime warranty. LOGIQ backs its air spring kits with a limited lifetime warranty.

F-150 Air Spring Kit Specs

What's in the Box

• 1 × driver side air spring assembly
• 1 × passenger side air spring assembly
• 1 × hardware kit
• 1 × manual inflation kit

AirIQ air management, the AirIQ Remote and the air tank are not included with this kit.

Fitment Notes

• Does not fit Raptor or Lightning models.
• Not compatible with most fifth-wheel hitches.
• Not compatible with most aftermarket leaf springs.
• PowerBoost hybrids and trucks with factory rear height sensors need additional part 88-21150-1.
• Requires a minimum of 3.5" (approx. 89mm) clearance between the tyre sidewall and the leaf spring.

Never exceed the manufacturer's maximum payload or GVM. Airbags improve load support and levelling, but they don't increase your truck's rated capacity.

Who It's For

• F-150 owners towing caravans, camper trailers, boats or horse floats on a standard towbar
• Half-tons that sag at the rear under a loaded tub, toolbox or canopy
• Anyone who wants level, stable towing without giving up the factory ride when empty

Frequently Asked Questions

Does it fit the F-150 Raptor or Lightning?

No. The kit isn't compatible with Raptor or Lightning models.

Can I use it with a fifth-wheel hitch?

The kit isn't compatible with most fifth-wheel hitches. If you're running or planning a fifth-wheel setup on your F-150, talk to us first and we'll confirm before you order.

My F-150 is a PowerBoost or has rear height sensors. Will it fit?

Yes, but you'll need additional part 88-21150-1. Get in touch with your truck details and we'll confirm what's needed.

Will it clear my wheels and tyres?

The kit needs at least 3.5" (approx. 89mm) between the tyre sidewall and the leaf spring. If you're running wider aftermarket wheels or a lower offset, measure before you order, or send us your wheel and tyre specs.

Does this kit include a compressor?

No. This is the air spring kit only, with a manual inflation kit for filling the bags. For phone or in-cab control, add the AirIQ SD2, or the AirIQ HD2 if you're adding an air tank.

Do airbags increase my payload or GVM?

No. Airbags support and level the load, but they don't change your truck's rated payload or GVM. Always stay within the manufacturer's limits.

Can Tough Trucks install it?

[Add your install/booking line here.]

Download the F-150 air spring kit installation instructions (PDF)