Toyota · car licence

Toyota Tundra GVM Upgrade

Toyota Tundra on a Tough Trucks build
Choose a GVM path

A Toyota Australia Tundra Limited or Platinum, 2023 to 2026, is certified at 3,536 kg from the factory. These federally approved SSM packages take it to 3,850 kg or 4,300 kg. Both stay under 4,500 kg, so a car licence still covers the truck. Braked towing stays 4,500 kg. Platinum is heavier than Limited, so its payload is lower at the same GVM. We fit the package as specified at Arundel or Mackay.

Packages

Stages 1 and 2 keep the factory 265/60R20 wheels. Stages 3 and 4 need a wheel rated to 1,225 kg, a 116Q tyre, and can run a 35x12.5. Front axle capacity stays 1,850 kg on every stage.

Stage 1

3,850 kg

Lift
3 inch
Suspension
Fox 2.5 Elite, lighter rear coils, BDS arms
Payload
About 1,028 kg on Limited
Wheels
Factory
GCM
8,350 kg

Stage 2

3,850 kg

Lift
2.25 inch
Suspension
Fox 3.0 bypass shocks
Wheels
Factory
GVM
Same rating as stage 1. Pick this for the shock, not for more mass.

Stage 3

4,300 kg

Suspension
Fox 2.5 Elite, 300–500 kg rear coils
Payload
About 1,478 kg on Limited
Wheels
Rated to 1,225 kg
Tyres
116Q, up to 35 inch. Flares are part of the package.
GCM
8,800 kg

Stage 4

4,300 kg

Suspension
Fox 3.0 bypass, with speedo correction for the 35 inch tyre
GVM
Same 4,300 kg. The shock change does not raise GVM.

Compare the stages

Tundra Limited and Platinum factory rating against each SSM stage.
Spec Factory Stage 1 Stage 2 Stage 3 Stage 4
GVM 3,536 kg3,850 kg3,850 kg4,300 kg4,300 kg
Payload, Limited 758 kg1,028 kg1,028 kg1,478 kg1,478 kg
Payload, Platinum Lower than Limited986 kg986 kg1,436 kg1,436 kg
GCM 7,825 kg8,350 kg8,350 kg8,800 kg8,800 kg
Braked tow 4,500 kg4,500 kg4,500 kg4,500 kg4,500 kg
Lift Factory3"2.25"3"2.25"
Suspension Factory Fox 2.5 Elite, 100–250 kg coils Fox 3.0 bypass, 100–250 kg coils Fox 2.5 Elite, 300–500 kg coils Fox 3.0 bypass, 300–500 kg coils
Rear axle 1,850 kg2,000 kg2,000 kg2,450 kg2,450 kg
Tyre index Factory110Q110Q116Q116Q
Wheels required NoNoNoYes, 1,225 kgYes, 1,225 kg
Max tyre 265/60R20265/60R20265/60R2035x12.535x12.5

What stays in the kit

In the approved package

  • BDS control arms on every stage
  • The Fox shock named for that stage
  • Install at Arundel or Mackay

Quoted around it

  • Load-rated wheels on stages 3 and 4
  • Bull bar, lighting and a canopy
  • Anything that changes kerb weight

State-Based Engineering

There is no Tundra lift-kit collection. If the federal package does not match the truck, we quote a state-based modification plate. Those kilograms are set for the VIN and they are not the stage ratings.

Add to the build

Where a stage needs a load-rated wheel, we quote it with the package. It is not approved until the provider signs it off and the load rating meets the figure in the table. The order is an AEV wheel that fits this truck, then the KMC KM733 Impact FFT on an HD 8-lug, then Fuel Maverick or Fuel Vapor in 18x9 or 20x9 at +20. Method is not on this list. Tyres are a BFGoodrich Mud-Terrain T/A KM3 when a size meets the stage load index, or a BFGoodrich all-terrain. Lights and a bull bar sit outside the approved kit. A bar, winch or canopy adds kerb weight and uses payload.

Tundra GVM questions

Limited or Platinum, which payload do I use?

Platinum kerb weight is about 2,834 kg from the factory against 2,792 kg for a Limited, and the gap stays after the upgrade. At 4,300 kg a Limited has about 1,478 kg of payload and a Platinum about 1,436 kg. Send the badge with the VIN.

Do I need new wheels for a one-tonne payload?

Not for 3,850 kg. Stages 1 and 2 clear that on the factory 265/60R20. The 4,300 kg stages need a 1,225 kg wheel and a 116Q tyre.

Does 4,300 kg need a truck licence?

No. Light Rigid starts over 4,500 kg. A Tundra on this package stays on a car licence.

Request a quote Toyota Tundra

Tell us the VIN, the stage, and whether the truck is already registered. We fit the approved package as specified. Pricing is on application. Call 07 5500 0095.

Your details
The truck